Outdoor Woodburning Boilers

E-Classic

Highly efficient, the E-Classic 3200 is the most advanced outdoor woodburning boiler on the market. Stainless steel models are available.

View measurements

E-Classic Model Features

  1. Charge Tube – Crossfire air system adds preheated air in all the right places around the base of the fire. As the wood begins to gasify, the gases are added to the extremely hot oxygen from the patent-pending Charge Tube. This starts the secondary combustion process.
  2. Large Reaction Chamber – Final combustion takes place as these gases move downward to the Reaction Chamber. Temperatures exceed 2000°F, resulting in very complete combustion. This entire process gives this woodburning boiler its high efficiency and extremely low emissions. The large, hinged door provides for easy ash removal.
  3. Firebox – The significant size of the Firebox reduces the time spent on wood preparation/processing.
  4. Urethane Spray Foam Insulation – Covers the water jacket gives you the best energy savings, even when the conditions outside are at their worst. This insulation provides a 100% airtight, waterproof seal around the water jacket which makes your wood pile last longer.
  5. High Capacity Water Jacket – provides a balance between firebox volume and water capacity for optimum performance and safety. Continues to supply heat after the wood load is depleted.
  6. Insulated Chimney – Two 4-foot insulated chimney sections are standard. Additional sections are available for extending the chimney when needed.
  7. All-Weather Steel Siding – Overlapped for tighter weather seal. Panels and corners are powder coated for high durability.
  8. Vent Cap – Design eliminates evaporation.
  9. Triple Insulated Firebox Door – Is just the right height and features a large opening for easy loading, making your job much easier. The ergonomically designed, lockable door features a Cam Loc door closure that secures the door at all four corners and provides a tight seal each time the door is closed. Its triple insulation keeps the heat in and the cold out for maximum efficiency.
  10. Bypass Door – Allows you to redirect the exhaust before opening the firebox door. The Bypass Door Alarm reminds you to close the bypass door after you have closed the firebox door for efficient operation of your woodburning boiler.
  11. LED Lights (Photo Electronic Controlled) – The long-lasting, energy efficient LED night lights save money and enhance safety. They illuminate the inside of the firebox and the front and sides of the outdoor woodburning boiler and can be set to conveniently, automatically turn on at night.
  12. Xtract® Heat Exchanger – Allows you to get the most heat out of your wood. It is designed to optimize the transfer of heat from the extremely hot gases to the water. The vertical design of the heat exchanger minimizes the amount of maintenance.
  13. FireStar II Electronic Controller – Optimizes the gasification process by automatically adjusting the primary and secondary air. This allows for a cleaner and more efficient burn.
  14. Insulated Rear Access Panel – Gives you full access to the Reaction Chamber door, power disconnect and pumps, all from one location. That makes installation and maintenance convenient and easy. The insulated panel keeps the heat in and the cold out, which preheats the combustion air and makes the woodburning boiler more efficient.
  15. Cam Loc – The Cam Loc door closure mechanism secures the Firebox Door at all four corners and provides a tight seal each time the door is closed.
  • TITANIUM SERIES Models Available (3200 Model Only) – Titanium Series models offer the same features and benefits of non-stainless models with the added benefit of a stainless steel firebox assembly.
    • Provides superior firebox corrosion resistance
    • Allows for longer burn times
    • Extends life of the woodburning boiler
    • Adding the proper water treatment BEFORE adding water to the system is critical for stainless woodburning boilers. Be sure to review the Owner’s Manual and Warranty/Registration for requirements. Your local dealer can provide more information about Titanium Series models.
  • UK/EU Certified to EN303-5, MCS, HETAS and RHI approved.

 

E-CLASSIC 3200

SPECIFICATIONS
Door 572mm W x 724mm H
Firebox Length 1016mm
Firebox Volume 0.91 cu m
Weight 1470kg
Water Capacity 1552L
Supply/Return Ports, 3/4″ 2 each
Supply/Return Ports, 1-1/4″ 1 each
Manufacturer’s Rated Heat Output Capacity 88 kW*


Included with outdoor woodburning boiler
 – Water Test Kit, Cleaning Rod, Scraper Tool, Ground Rod Kit, Heat Exchanger Scraper, Thermostatic Valve Kit and two 4-foot chimney sections

*Based on EN303-5 test.

COLOUR Colour selections are close representations but are limited by processing and viewing conditions.

ENERGY EFFICIENCY LABEL

E-Classic 3200 Owner's Manual

Stay connected with the Firestar XP monitoring system

Find out More